Printed Circuit Board Assembly Process Flow
PCBs are made of different parts and resins with circuitry on the surface to connect parts to one another. A PCB will usually have components for memory chips, processors, input/output devices, and then electrical components like resistors and capacitors.
Sample circuit board
Max working panel area
Min boartd tinckness
4 Layer:0.4MM/6 Layer:0.8MM/8 Layer:1.0MM/10 Layer:1.2MM
resistance/ capacitance/diode/transistor/ IC / IC socket.etc.
Available on request
Place of Origin
The printed circuit board provides mechanical support for fixing and assembling various electronic components such as integrated circuits, and realizes wiring, electrical connection or electrical insulation between various electronic components such as integrated circuits, and provides required electrical characteristics. It provides solder mask graphics for automated soldering, identifying characters and graphics for component insertion, inspection, and repair.
Requested information for pcb assembly
1. Gerber file of the bare pcb board
2. BOM for assembly(bill of material)
3. Testing Guide & Test file
4. Programming files&programming file
5. Schematic if necessary
6. Clear Pic. of PCB or PCBA sample if available